Using your CR fixturing on a CH2 system
| Things to Consider | CR | CH2 | Discussion |
|---|---|---|---|
| Style of connectors | (AHED-64) 64-conductor IDC ribbon cable | Euro-DIN 96 pin connector populated with 32 pins. |  The CR utilizes a 64 pin AHED connection while the CH2 uses a 96 pin Euro-DIN with 32 pins populated. |
| Number of points | 64 | 32 | |
| Voltage considerations | Ribbon cable connections are generally good for up to 1000VDC and 700 VAC, while Discrete type connections are good for up to 1500 VDC and 1000VAC. | ||
| CH2-CR Converter |  The CH2-CR Converter (Part #ACH2-CR) was developed for customers to plug their existing CR 64 pin connectors onto the CH2 system. The CH2-CR Converter card mounts onto the front of the CH2 tester, converting two 32 pin Euro-DIN style connectors to a single 64 pin header like that on a CR. Typical cost is $1.18 per test point, connector only.  |
||
| Adapter Panel |  A Turn-Key Solution for more complex systems is our adapter panel for the CH2. Both internal and external connectors and wiring are replaceable, inside and out. Typical cost is $5.00 per test point (800 points, $4000.00) |
||
| Discrete |  |