Legacy Products
Legacy Products At Cirris, we're committed to ensuring the longevity of your investment in our products. We understand the importance of maintaining functionality even as technology evolves and parts become…
Product Articles
Product Articles TestersSoftwareAccessoriesLegacy ProductsTesters ⬅Return ‘Habit Capture Errors’ and Bin Alarms 4-Wire Testing Fixture Setup Information Bad Cable or Bad Test Fixturing? Barcode Scanners and Cable Testing Cable Tester Demo…
Discontinued Products
Discontinued Products The following discontinued products are no longer manufactured. When a product reaches End of Life, it is no longer eligible for repairs or replacement parts from Cirris. Cirris…
Error When Trying to Edit/View a Test Program in Easy-Wire®
Error When Trying to Edit/View a Test Program in Easy-Wire® If the following errors are received when trying to Edit/View a test program with the Easy-Wire Edit it could be…
Choosing Which Standard Cirris Connector to use on Your Cable Tester
Choosing Which Standard Cirris Connector to use on Your Cable Tester Note: this article addresses options for sharing interfacing between Cirris’ Signature series, Easy-Wire® CR and CH2 harness testers. For information…
Data Collection and Reporting Capabilities
Data Collection and Reporting Capabilities Many Cirris customers are primarily concerned with simply testing their cables and having test reports that are limited to providing “pass/fail” results of their testing.…
Correcting a Problem Install of Easy-Wire®, CTLwin, Software
Correcting a Problem Install of Easy-Wire®, CTLwin, Software Back Story: Cirris Systems offers a number of software products that use "Firebird" database services. If a customer is reinstalling a software…
Retrieving First-Pass-Yield Info
Retrieving First-Pass-Yield Info First Pass Yield (FPY) is the number of assemblies that pass a test divided by the total number tested. So: FPY = number of good assemblies / total…
Error: Value is not supported by the attached tester hardware
Error: Value is not supported by the attached tester hardware The error message '<Setting> Value is not supported by the attached tester hardware' may appear when you try to run a…
Digital I/O
Digital I/O Digital I/O on your CH2, 8100, and 4200 Series tester makes it easy to customize the tester with: Foot switch for “Start Test” Palm buttons for hipot safety…
