Printing Labels with Cirris Testers
Printing Labels with Cirris Testers Cirris testers have always had the ability to connect to a printer for hard-copy printouts. More and more, however, customers are asking for the ability…
Error When Trying to Edit/View a Test Program in Easy-Wire®
Error When Trying to Edit/View a Test Program in Easy-Wire® If the following errors are received when trying to Edit/View a test program with the Easy-Wire Edit it could be…
Testing Assemblies with Switches
Testing Assemblies with Switches Often Cirris customers need to test assemblies with switches in them. From simple devices such as an A-B switchbox to complex assemblies with many switches, buttons,…
Choosing Which Standard Cirris Connector to use on Your Cable Tester
Choosing Which Standard Cirris Connector to use on Your Cable Tester Note: this article addresses options for sharing interfacing between Cirris’ Signature series, Easy-Wire® CR and CH2 harness testers. For information…
What is the Most Cost-effective Way to Back-wire a Harness Board?
What is the Most Cost-effective Way to Back-wire a Harness Board? When it comes to wire harnesses built on form boards, one of the biggest challenges is: "Where do you…
Data Collection and Reporting Capabilities
Data Collection and Reporting Capabilities Many Cirris customers are primarily concerned with simply testing their cables and having test reports that are limited to providing “pass/fail” results of their testing.…
Correcting a Problem Install of Easy-Wire®, CTLwin, Software
Correcting a Problem Install of Easy-Wire®, CTLwin, Software Back Story: Cirris Systems offers a number of software products that use "Firebird" database services. If a customer is reinstalling a software…
Retrieving First-Pass-Yield Info
Retrieving First-Pass-Yield Info First Pass Yield (FPY) is the number of assemblies that pass a test divided by the total number tested. So: FPY = number of good assemblies / total…
4-Wire Testing Fixture Setup Information
4-Wire Testing Fixture Setup Information Signature 1000H+: All test points must be wired as 4-wire points. You must use the Signature AV4W-64 adapter. This adapter has 2 VME connectors on…