High Speed Hipot The High speed hipot option allows multiple nets to be tested simultaneously, increasing the speed of the test. This is an attractive option if you have long…
Digital I/O Digital I/O on your CH2, 8100, and 4200 Series tester makes it easy to customize the tester with: Foot switch for “Start Test” Palm buttons for hipot safety…
Cable Testing Glossary Term Definition connections The continuous electrical path between 2 or more points wherein current flows. The path is constructed with metal parts, such as copper wire, contacts,…
Fixing Easy-Touch® Start Up Issues If you get a "blue screen of death" or other errors when trying to start up the Easy-Touch, follow these steps: 1. Unplug everything except…
High Voltage Testing of Cables with Components To "hipot test" a cable assembly means to apply a High Potential between each wire and all other wires (and shields) to assure…
Easy-Touch® Hardware Error While Using the Tester If you receive the follow hardware error while using the Easy-Touch you may have a bad tester processor card: #6 EW1100 tester not…
Should Connector Shells and Unused Contacts be Tested? Question 1: Should "Unused Contacts" be Tested? Best practice is to test every point in every connector. Sometimes people will scrimp on…
Guidelines for Low Voltage Tests Test Situation Recommendation No testing This is justified when testing does not find sufficient defects to justify the additional cost in testing. This assumes the…
