Board Size Options
Board Size Options Single High Adapter The board on the left is called a SINGLE HIGH ADAPTER because it has only one 'right angle header' on the board. This "Single"…
Testable Grounded Shells
Testable Grounded Shells If your cable includes a shield wire (ground line) that runs from shell to shell and you wish to test that wire for shorts to any other…
CH2 – Energization of Relays
CH2 - Energization of Relays External power energization is now available for the easywire CH2 Tester. The CH2 Energization Unit (E Box) is a separate test box (see top box…
Using the CH2 to Test Relays, Lamps, and Other Devices Requiring Power
Using the CH2 to Test Relays, Lamps, and Other Devices Requiring Power The CH2 allows the testing of assemblies containing relays. Relay testing uses the new Easy-Wire Actuate and Energize…
Testing Switches and Relays
Testing Switches and Relays On Easy-Wire© CR and CH2 You can test switches and relays using OPEN and CLOSE instructions. Each state of a switch or relay must be tested.…
General Relay Testing Guidelines
General Relay Testing Guidelines The CH2 with the optional Energization Module is the only tester Cirris recommends for testing assemblies with relays. Each relay needs to be tested to verify…
