Below is a summary of the common minimum pull strengths per wire size. This summary is for reference only. Be sure to consult the actual standards before adopting these criteria in your quality processes and representing your compliance to these specifications.
Tensile Strengths (lbs) | ||||||
| Gauge | SAE AS7928 Table II | MIL-T-7928G (for ref.) | U.L. 486A Terminals | U.L. 486C Splices | DIN 41611/3 | NASA-STD 8739.4 |
|---|---|---|---|---|---|---|
| 32 | 1.4 | |||||
| 30 | 2.1 | |||||
| 28 | 3.2 | 5 | ||||
| 26 | 7 | 7 | 3 | 3 | 5.0 | 8 |
| 24 | 10 | 10 | 5 | 5 | 8.1 | 8 |
| 22 | 15 | 15 | 8 | 8 | 11.1 | 13 |
| 20 | 19 | 19 | 13 | 10 | 17.1 | 21 |
| 18 | 38 | 38 | 20 | 10 | 25.2 | 32 |
| 16 | 50 | 50 | 30 | 15 | 39.8 | 41 |
| 14 | 70 | 70 | 50 | 25 | 58.0 | 65 |
| 12 | 110 | 110 | 70 | 35 | 92.1 | 103 |
Related Links:
If you know of other specifications that might be helpful, please e-mail us and let us know (This email address is being protected from spambots. You need JavaScript enabled to view it.). |
