Resolving Error: xTestSounds.TTestSounds If you get the error: "xTestSounds.TTestSounds.play_beep: easywire\Sound\open.wav not Found", you may be missing entries from you INI configuration file. This can happen from improper system shut down,…
Resolving Error: Bad checksum when opening tests If you get the following error when trying to load or edit a test program, you have database corruption: Error: dmDatabase.TDataAccess.RunQuery: Exception fired.…
CH2 Verification Problem: #2 Wire missing J2-31 J2-32 If you get the error "Wire missing J2-31 J2-32" when performing a verification test on the CH2: You may be using an…
First Pass Yield Survey Results The survey information on this page relates to the issues outlined in the 4-part series listed below. Part 1: Continuous Improvement for Cable/Harness assembly Part…
Lean One-Piece Flow & Discrete Wire Label Verification Do you build a large quantity of the same cable? Or small quantities of different cables? Depending on your process, you may…
Verify Cable Tester Programs BEFORE Testing In order to assure valid testing on your harness or cable tester you must verify that it is programmed correctly BEFORE you begin testing…
Choosing Connectors for Test Fixturing (Test Adapters) If Your Device Under Test Has Your Fixturing Should Have Discussion Contacts that oxidize (such as silver, tin, or nickle) Pins that can…
Capacitance and Cable Testing What is Capacitance? Watch the video Any two conductors separated by a distance can store a charge. So any two wires in a cable or harness…
Testing Shielded Cable Assemblies Why do cables have shields? To prevent signals in cables from radiating and causing interference. To prevent outside signals from affecting signals inside the cable. To…
