4200

4200
Cable Tester

The Cirris 4200 cable tester provides an easy-to-use low voltage testing platform to test for errors. The tester accommodates the Cirris adapter system allow it to be quickly setups to connect to your device under test or interface cabling requirements..

The Cirris 4200 cable tester combines the powerful Cirris OS software with the intuitive Cirris Adapter System to create a capable tester that can accurately analyze your cables for opens, shorts, miswires, and other errors.​

It’s small footprint brings testing to your benchtop​ and is capable of testing wires with resistors, capacitors and diodes​. With a 7″ color capacitive touch screen​ and wired or wireless ethernet, the 4200 makes testing easy and accessible.

The 4250 comes standard with 128 test points and can expand to 1024 test points​ in 128-point increments with expansion units.

Features

high voltage test on 4250

Fast, Intuitive Testing

Innovative technology and efficient algorithms reduce time spent on testing. No advanced skills or training necessary to begin testing.

4250 wireframe

Compact & Expandable

Expansion boxes create up to 1024 test points (128 points per box). Small, lightweight, and self-contained for easy movement around production floor.

zener diodes

Thorough Testing

Test for continuity, isolation, opens, and miswires. Analyze components such as resistors, diodes, capacitors, and perform 4-wire Kelvin resistance measurements.

attaching a Cirris adapter to the tester

Cirris Adapter System

Add test points with expansion boxes in 128 point increments. Test up to a maximum of 1024 test points per station.

4200 screen Spanish

Language Options

Interface translated into several languages to avoid mistakes caused by language barriers.

Test technicians using laptop at wiring harness

Network capable

Wired and wireless ethernet. Integrates with the Cirris Hub software to share test programs and network printers among multiple units.

Specifications

Test Points

Base Unit 128 points; expandable to 1,024 points in 128-point increments

Low Voltage Test

2 Wire

  • Voltage: 4 V max
  • Current: 3 μA to 6 mA
  • Resistance: 0.1 Ω to 100 kΩ ± 1% ± 0.1 Ω, 100 kΩ to 5 MΩ ± 10%

4 Wire

  • Voltage: 4 V max
  • Current: 1 mA to 1 A
  • Resistance: 0.005 Ω to 10 Ω ± 2% ± 0.005 Ω

Component Tests

  • Diodes: Silicon, LEDs, zeners with breakdown > 4 V
  • Resistors: 0.1 Ω to 100 kΩ ± 1% ± 0.1 Ω, 100 kΩ to 5 MΩ ± 10%
  • Capacitors: 5 nF to 100 μF ±10% ± 0.02 nF

Max Points Per Net

Unlimited

Digital Input/Output

4 Inputs* / 6 Outputs, 24 V, Open collector outputs
*2 of the inputs available via scripting or Easy-Wire Software

Test Point Interface

Cirris Adapter System

User Interface

  • Display: 7” color graphical display with capacitive touch screen(800 X 480 pixel resolution)
  • Interface Languages: English, German, Spanish, and French
  • Memory: Internal memory for test program storage (8GB or more)
  • File transfer: Transfer test programs either by connecting directly to a PC or using a USB flash drive.
  • Printing: Local label printing via serial port. Network printing via optional Cirris Hub™ software.
  • Optional PC Control: Connect to a PC and expand capability with Cirris Easy-Wire™ software.

Power

100-240V~, 50-60Hz, 1.2A

Dimensions (width x height x depth)

  • Main Unit: 17.4 x 2.5 x 6.7 in. (44.1 x 6.4 x 17.0 cm)
  • Add-on Box: 6.3 x 2.5 x 6.7 in. (16.0 x 6.4 x 17.0 cm)

Note: Dimensions are approximate.  Contact factory for exact product dimensions.

Weight

  • Main Unit: 7.10 lb (3.22 kg)
  • Add-on Box: 2.30 lb (1.04 kg)

Datasheet

Icon

4200 Datasheet

Version 2021.2.1  |  232.08 KB

Product Options

4250 Base Unit  (C4200-LV)

4200 with 128 points

4200 expansion unit

4200 Expansion Unit (4200-ELV)

Increase the test point count in your system by adding up to seven expansion boxes for a maximum of 1024 test points. Seven add-ons can be mounted in one or two rows. An internal cable (CBL-1024) must be used when using seven expansion boxes.

4200 Scripting Option (SCPT-4200)

Scripting can make your tester more flexible to customize a test process for a unique task. Examples for using scripts:

  • Create complex tests that are easy for line workers to use.
  • Provide extra control external devices such as lamps, hold-down clamps, markers, etc.
  • Add flexibility when testing devices such as switches, gas fuses, zener diodes, bi-color diodes, etc.
  • Interact with sensors to verify color and lighting of LEDs.
  • Display operator prompts and messages.

4200 PC Control  (PCC-4200)

Control the 4200 using a Windows PC running Easy-Wire software. Easy-Wire license required.

 

Easy-Wire Software (SOFT-EW)

Provides added capability to control the 4200 tester. 4200 PC Control required.

Cirris Server Software (LANL-EW)

Use Easy-Wire software to share test information on a network.

4200 Data Collection (SPC-4200)

Allows the 4200 to save test data which can then be imported into a spreadsheet or third party SPC data processing program. You can use the data to analyze and improve product quality or to generate reports for either your customers or in-house management team. Data collection must also be enabled to show measured values on reports when using Easy-Wire software.

4200 Performance Verification Kit (PCHK-4200)

Allows you to verify the calibration and proper functionality of the 4200 tester.

Digital IO Module

Digital IO Expansion Module (DIO-MOD)

The 4200 Tester comes standard with four inputs and six outputs. The Digital IO Expansion Module increases IO capability with 20 pins that can be configured to either inputs or outputs, and eight output-only pins. Use Digital I/O to add automation devices, such as start buttons, clamping mechanisms, status lights and audio output.

Product Documentation & Software

Getting Started

4200 Series Getting Started Guide

Get your tester set up and run your first test.

Icon

4200 Series Getting Started Guide

Version 2023.4.1  |  734.36 KB

 

4200 Series User Manual

Learn all about your tester.

Icon

4200 Series User Manual

Version 2024.2.0  |  2.30 MB

 

4200 Series with Easy-Wire Getting Started Guide

Getting your tester up and running when controlling it with the optional Easy-Wire software.

Supporting Documentation & Software

4200 Migration Guide

If you want to use test programs from the Cirris 1100, Touch1, or Easy-Touch testers, read this document.

Icon

4200 Series Migration Guide

Version 2020.3.0  |  539.99 KB

 

Cirris Hub

Allows the user to see tester status, share test programs, edit tests, and print to network printers. The Cirris Hub interface can be accessed on a network PC or mobile device.

Icon

Cirris Hub Install

Version 2023.4.1.8024  |  256.01 MB
MD5 Checksum: 6c047a1f97fcbf1f7a038d5330ef3330   ...

Icon

Cirris Hub User Manual

Version 2023.2.0  |  4.16 MB

 

42XX Utilities

This executable installs both the 42XX Security Utility that allows you to restrict menu access on the tester, and the 42XX Download Utility to update the tester firmware.

Icon

4200 Series Utilities Install

Version 2021.3.1_8001  |  26.42 MB

 

SPC Link

If you are not using Easy-Wire to control your 42XX tester, and you have Data Collection enabled on your tester, this software allows export of collected test data to a spreadsheet program. Refer to the 4200 Series User Manual for more information.

Icon

SPC Link

Version 2019.3.1.7  |  105.91 MB

 

Easy-Wire Software

Optional software that expands the 42XX tester features by allowing it to be controlled with the Easy-Wire Software on a connected PC. Easy-Wire software allows more options for test control, test archiving, and test reporting. If networking, the Cirris Server Software must be the same version as the Easy-Wire Station Software.

Icon

Easy-Wire Station

Version 2023.4.4.8025  |  337.46 MB
MD5 Checksum: 04f51953c8a804f8524ff7af3082b457 Cirris...

 

Cirris Server

Allows testers running Easy-Wire to be networked together storing test programs and test data in a central network location. Software version must be the same version as your Easy-Wire install. Contact your Cirris salesperson to purchase and receive unlock password.

Icon

Cirris Server Install

Version 2023.4.4.8025  |  306.82 MB
MD5 Checksum: 09199eae1021bd544c1e9bc7a12d8c6e ...

Icon

Cirris Server Installation Guide

Version 2023.4.2  |  197.94 KB

 

Digital IO Module

Digital IO allows you to set up automated actions to make the test process safer and more efficient.

Icon

Digital I/O Module Getting Started Guide

Version 2017.12.05  |  170.52 KB

 

4200 Performance Verification

Use this procedure with a Performance Verification kit to verify the calibration of your tester.

Icon

4200 Performance Verification Manual

Version 2021.2.2.0  |  676.95 KB

Additional Documentation & Software

Stand-Alone Scripting 4200 Testers

Scripting allows test customization of the test process and reports. Scripting is an optional feature that must be purchased. Stand-Alone scripting allows the scripting on the tester without the tester being controlled by Easy-Wire software.

Icon

LUA Scripting Manual

Version 2010.0.0  |  962.77 KB

 

Easy-Wire Scripting

Scripting allows customization of the test process and reports. Scripting is an optional feature. Use Easy-Wire scripting when the tester is being controlled by Easy-Wire.

Icon

Easy-Wire Scripting Manual

Version 2017.4.0  |  1.80 MB

 

Cirris Tester Access API (CTA)

Allows the tester, when controlled by Easy-Wire Software, to be controlled by a third party application such as LabVIEW, C++, C#, Python, and Delphi.

Icon

Cirris Tester Access (CTA) User Manual

Version 2023.2.0  |  536.15 KB

 

CTL Test Language

Enables you to control the tester through a serial or USB.

Icon

CTLWin

Version 2021.3.1.8001  |  129.37 MB