Digital I/O
Digital I/O on your CH2, 8100, and 4200 Series tester makes it easy to customize the tester with:
- Foot switch for “Start Test”
- Palm buttons for hipot safety
- Status lights
- Device locks
- Stampers
- Audio Output
With digital I/O you link an event in the test to an input or output on the tester’s I/O connector. Some of the events available:
- Cable Attached: the tester sensed a connection between 2 or more test points.
- Cable Counted Bad: the tester counted a cable “bad” in the test summary.
- Cable Counted Good: the tester counted a cable “good” in the test summary.
- Cable Removed: the tester sensed the cable is removed.
- Failed Self Test: the tester failed self-test when turned on.
- HV Delay Started: the tester started the delay before the HV test.
- HV Test Delay Done: the tester completed the delay before the HV test.
- HV Test Done (P/F): the tester completed the high voltage test with either a pass or fail.
- HV Test Failed: the high-voltage test failed.
- HV Test Passed: the high-voltage test passed.
- HV Test Started: the tester started the high-voltage test.
- HV Test Aborted: the tester aborted during the hipot test.
- Is Intermittent: the tester detected an intermittent error in the DUT.
- Count Intermittent: the tester counted a cable “intermittent” in the test summary.
- Learn Completed: the tester completed the cable learn process.
- Learn Started: the tester began the cable learn process.
- LV Test Done (P/F): the tester completed the low-voltage test. The test passed or failed.
- LV Test Failed: the low-voltage test failed.
- LV Test Passed: the low-voltage test passed.
- LV Test Started: the tester started the low-voltage test.
- Ready to Test: the tester is ready to test. The cable may or may not be attached.
- Will Count Good: if the cable were removed, it would count as “Good”.
- Will Count Bad: if the cable were removed, it would count as “Bad”.
- Good Light On: the front panel “Good” light is on.
- Good Light Off: the front panel “Good” light is off.
- Bad Light On: the front panel “Bad” light is on.
- Bad Light Off: the front panel “Bad” light is off.